10 Common Spray Paint Hydro Dipping Problems & Solutions

Hydro dipping is the most popular dying method for its easy process. Most people love to use spray paint for less mess. But some common mistakes make this simple way worse if you don’t use this method in the correct ways.

There are various hydro dipping problems that people do during hydro dipping painting. For Examples; include improper dying plan, wrong paint, spray paint incorrectly, not waiting to dry fully, and much more.

If you can skip those processes, your hydro dipping projects will be more successful. Below we will discuss some common mistakes with solutions. Get started!

Interesting Read: How To Hydro Dip With Spray Paint?

Spray Paint Hydro Dipping Paint Problems & Solutions

Common Spray Paint Hydro Dipping Problems
Common Spray Paint Hydro Dipping Problems

Let’s see the issues so that you can avoid them and increase the chances of getting wonderful water transfer of the graphic on the objects.

1. Improper Planning

A good plan before hydro-dipping paint using spray paint is the most important. Without pre-preparation or pre-planning, creating any art and craft will be wrong.

An improper plan will ruin the painting and your investment. As part of a hydrographic plan, you have to know what ingredients are needed for hydro dipping.

You also have to know how to DIY your items following this method.

If you track those facts properly, you can most effectively get a perfect hydrographic design on your targeted items.

2. Wrong Spray Paint

There are various types of spray paint in the paint world. But all types of spray paints aren’t right for hydro dipping. If you pick spray paint for hydro dipping without any judgment, your all attempt will ruin within a few minutes.

So, choosing the best spray paint for hydro dipping is the most important part of avoiding any issues. The longevity, flame, and shine of design on the products most of the time depends on the best spray paint. 

3. Imperfect Water Selection

Yes, water is also a significant fact to consider when you are getting started with hydro-dipping paint. It is wrong if you think you can DIY any item using only freshwater. Some people don’t focus on water temperature and underestimate the hydro dip water temp for dying.

Using just clean water is a wrong decision which will destroy your paint. Only clean water or hot or cold water resist the items from absorbing the paint. So, you need to use lukewarm or warm water to spray the paint and help to attach the paint appropriately.

Basically, the water temperature should be 70° to 80° F. This temperature can vary depending on the surrounding temperature.    

4. Spray And Dip Items In the Wrong Way

When you spray the paints on the water’s surface from the wrong angle or incorrect ways, your art and design won’t appear in the right way. 

What is the right angle? Some spray paint manufacturers give instructions on the label of the painting bottle; you can follow those directions. 

Here you can use painting tape to skip painting the unwanted areas. And dip the sides slowly, which you want to DIY. If you are a beginner-level user, you shouldn’t try complex or complicated designs. 

5. Double Dipping

Many people don’t understand the painting process exactly. When the items can’t bond all paints at a time, they dip again to attach the rest paint to the objects. 

This process worsens the design and pattern due to second time dipping. So you should skip double-dipping your items.

Following the perfect dipping ways, dip the objects for once time. Dip the items at the right angle so that all paints can sit on the surface of the product within a few seconds. If needed, you can move the paint toward the items for fixing quickly.

6. Wrong-Way Of Using Paint

Dropping different paints at a time altogether or spraying the paints from the wrong angle can be responsible for spoiling your art and craft at the opening stage. You have to do this step very carefully without getting any risk.

Keep aside all paint bottles before dropping the paints on the water’s surface. And then drop the paints one by one continuously according to your required design. Learn how to lay spray paint from a perfect angle. It mainly depends on your practice.

Some rules you can follow, like shake the bottle before starting spray. During spraying, don’t hold the paint bottle from very close or far away. And then use a toothpick or wooden stick to make a design.   

7. Handle The Job Very Fast

Some people think hydro dipping is a very easy process, and they would like to do it very fast. But it is the wrong way. 

When you can handle the painting very quickly or very slowly, there will be a lot of mistakes, and you won’t get your desired design and pattern at all.

You need to make a good balance for dipping the items or getting out from the painted water. Though it is an art process, you need to do it in some relaxing mode. Do not hurry, relax and follow the steps of hydro dipping.

8. Not Use Premier Or Activator

Some objects require a primer or base coat before dipping and an activator after dipping. If you can’t use them properly, the paint will worsen and won’t be long-lasting. Some spray paint comes with a primer, and in this situation, you can skip the primer.

After dipping, items like a shoe activator can make the paint resistant to dirt. So, know the hydro dipping process first according to your objects and then decide what you have to pick with your paints.

9. Not Wear Safety Gear

Spray paint is a source of toxicity, and it will be an issue for your lungs and cause health problems. 

And when you dip the objects into the water, the paints also will be trapped in your hand, which mayn’t be removed completely even after washing.

So, wearing safety gear like hand gloves and a mask is a great idea before spraying the paints and dipping the items into the water.    

10. Dip Items In the Wrong Situation

Last not least, when you use primer, the objects become wet, and if you dip it into the painted water at this moment, the paint can’t attach. 

In addition, if the objects remain unclean and ungreased, the paints also can’t be fixed with the products.

You need to focus on this type of fact so that the objects can absorb the paint instantly. 

FAQs: Spray Paint Hydro Dipping Problems

What Can You Hydro Dip?

Hydrographic can apply to many different types of items, including plastic, glass, ceramic, metal, and even paper.

Why Is My Hydro Dip Clumping?

Lowering the objects very fast through the painted water can cause the paint can break apart. It will lead your items into a bad situation. Lowering very slowly can worsen and can let the paint clump together.

Do You Need A Base Coat For Hydro Dipping?

Yes, some products require a base coat before hydro-dipping painting. Correctly using the base coat is the most important for hydro dipping paint. 

If you make a mistake, it’ll pose a big issue later. So the base coat is the main fact for the final pattern.  

Wrap Up!

Though we have shown some common spray paint hydro dipping problems in this article, there are more issues that you may invent while you do it practically. But we hope you will keep in mind the above mistakes and they will help you complete your painting with fine results.